tic 0.9.0.9008 (2020-11-18)

  • update peter-evans/create-pull-request action in update-tic.yml template to v3.5.0

tic 0.9.0.9007 (2020-11-14)

  • update GitHub Actions templates
    • update actions/checkout to v2.3.4
    • update actions/upload-artifacts to v2.2.1
    • update pat-s/always-upload-cache to v2.1.3
  • conditionally install pkgdown required system libs on both Linux and macOS

tic 0.9.0.9006 (2020-09-19)

  • Replace hardcoded references to “master” by a dynamic query of the default repo branch

tic 0.9.0.9005 (2020-09-04)

  • use_tic(): use GitHub Actions as the default provider for all platforms
  • Copy over GitHub authentication and SSH helpers from {travis}

tic 0.9.0.9004 (2020-08-27)

tic 0.9.0.9003 (2020-08-06)

  • GHA: add workflow_dispatch event trigger to templates
  • update instructions for spatial libs on macOS for GHA
  • improve heuristic for updating header parts of “custom” and “custom-deploy” templates

tic 0.9.0.9002

  • DSL: Don’t add steps twice, if present in a previous macro (#272)
  • update-tic.yml: use and actions/checkout v2.3.1. Run on ubuntu instead of macOS
  • run r-devel on ubuntu instead of macOS
  • pin actions/upload-artifact to v2.1.1
  • update actions/checkout to v2.3.1
  • update pat-s/always-upload-cache to v2.1.0
  • step_setup_ssh() now verifies that {git2r} is installed. This prevents build failures for {rsconnect} deployments
  • update-tic.yml: install libs via apt on Linux instead of brew

tic 0.9.0.9001

  • gha_add_secret(): Add new upstream parameters and fix endpoint

tic 0.9.0.9000

  • Same as previous version.

tic 0.9.0

Features

  • update_yaml(): Account for duplicated env vars when a custom env var masks a template env var
  • use_tic_badge(): Update tic badge and default action name (#269)
  • Installing and using ccache for faster source package installation is now optional. While using ccache can help a lot for installing large dependency chains of certain packages, it also adds substantial overhead to builds for small packages. It is now optional and needs to be added as a custom block to builds. (#264)
  • Add step_session_info(). This step prints the session info after having installed all dependencies in the “install” stage. (#259)
  • step_install_deps() and do_package_checks() gain dependencies = TRUE argument.
  • New use_update_tic(): Adds GitHub Actions workflow update-tic.yml to automatically update tic YAML templates
  • Support fully custom runner matrices on GitHub Actions via template types "custom" and ´“custom-deploy”`
  • New gha_add_secret() to automate the process of adding a GitHub PAT to a repo as a secret. This function will probably be move to {ghactions} in the future.

Bugfixes

  • Temporarily enforce {covr} dev version to account for timeouts on GHA, see https://github.com/r-lib/covr/issues/435
  • Remove alert in steps-install.R (#263)
  • Pass arg remote to all printing instances. Previously using a different remote than “origin” caused an error..

CI Provider specific

GitHub Actions

  • Update versions of “tinytex” and “always-upload-cache” actions (#267)
  • Install LaTeX on only one runner (#257)
  • Switch from main.yml to tic.yml (#260)
  • Set env var GITHUB_PAT from secret GITHUB_TOKEN to work around rate limits in {remotes}
  • Update actions/checkout to v2.1.1
  • Update pat-s/always-upload-cache to v2.0.0
  • Remove old clang7 compiler setup for R <= 3.6.3

tic 0.8.0.9009

tic 0.8.0.9008

  • Make ccache optional (and more) (#264)
  • Remove alert in steps-install.R (#263)

tic 0.8.0.9007

tic 0.8.0.9006

tic 0.8.0.9005

  • GHA: Set env var GITHUB_PAT from secret GITHUB_TOKEN to work around rate limits in {remotes}

tic 0.8.0.9004

  • New use_update_tic(): Adds GitHub Actions workflow update-tic.yml to automatically update tic YAML templates

tic 0.8.0.9003

  • Support fully custom runner matrices on GitHub Actions via template types "custom" and ´“custom-deploy”`
  • bugfix: Pass arg remote to all printing instances. Previously using a different remote than “origin” errored.

tic 0.8.0.9002

  • New gha_add_secret() to automate the process of adding a GitHub PAT to a repo as a secret. This function will probably be move to {ghactions} in the future.

tic 0.8.0.9001

GitHub Actions

  • Update actions/checkout to v2.1.1
  • Update pat-s/always-upload-cache to v1.2.0
  • Remove old clang7 compiler setup for R <= 3.6.3

tic 0.8.0.9000

  • Same as previous version.

tic 0.8.0

Features

  • New update_yml(): Update your {tic} yaml templates to the latest upstream version in {tic}. User changes are preserved if these are marked correctly. See vignette “Updating Templates” for instructions. This process can also be fully automated via a custom CI job.
  • Add argument force to step_do_push_deploy() for adding the --force flag to git calls
  • Add solutions to {rgl} installation issues to FAQ
  • Update .R/Makevars

CI Provider specific

GitHub Actions

  • Set CRON time to 4 am to avoid download issues with mirror updates
  • Added -I/usr/local/include to CPPFLAGS for macOS runners to mirror CRAN setup

Circle CI

  • Update r-oldrelease to R 3.6.3

tic 0.7.0.9000

  • GHA: added -I/usr/local/include to CPPFLAGS for macOS runners to mirror CRAN
  • Add solutions to installation issues for package {rgl} to FAQ
  • Add argument force to step_do_push_deploy() for adding the --force flag to git calls

tic 0.7.0

Macros

CI Provider specific

GitHub Actions

  • use_tic(): Move cli::tree() calls to use_*_yml() functions to avoid printing of false-positive trees.
  • use_*_yml(): Set defaults for argument type.
  • Fix GHA build URL and prettify deploy message (#247)
  • Adjust GH Actions templates to use the use_*_yml() logic (#246)
  • Bugfix: Packages on R-devel macOS are being installed in parallel again.

R 4.0 toolchain

  • GitHub Actions: R-devel on macOS now uses Apples default clang compiler and the 10.13 SDK (High Sierra) to mimic the CRAN toolchain behavior. (The 10.15 SKD causes various issues when installing packages from source.)
  • Env var SDKROOT is now set to /Library/Developer/CommandLineTools/SDKs/MacOSX.sdk to prevent linking issues on macOS >= 10.15.4

tic 0.6.0.9002

  • do_blogdown() and do_bookdown() gain argument cname, making it possible to pass a CNAME URL for deployments. This is useful when setting one sets orphan = TRUE and relies on a custom URL of the published content (otherwise the redirect would not work)
  • Add a better general intro about CI and explain some general CI terms (fixes #234)

tic 0.6.0.9001

tic 0.6.0.9000

  • Same as previous version.

tic 0.6.0

General

  • use_badge: Refactor to use default badges from the respective providers rather than from shields.io (too slow and sometimes badges did not render at all) (#240)
  • Condition deployment templates on a single runner for deployment. This avoids race conditions during deployment. This applies to all CI providers and templates (blogdown, bookdown, package) (#241)
  • Files specified for deployment via step_push_deploy(commit_paths = ) are now force added to the index by git. This enables to add directories like docs/ (e.g. created by a local pkgdown build) to .gitignore and still deploy it during CI (#237).

CI Provider specific

GitHub Actions

  • GitHub Actions: Always use option ‘–no-manual’ on Windows because LaTeX is not available (because it takes ages to install)
  • step_rcmdcheck(): Test in directory “check” to simplify upload of artifacts
  • Set cron job to 4am to avoid potential download issues with R-devel on macOS
  • Github Actions: Only deploy on R-release on macOS by default.

Bugfixes

Documentation

  • faq.Rmd: Add info how to avoid git race conditions during pkgdown deployment (#238)

tic 0.5.0.9005

  • use_tic() fails with descriptive error message if the badges start/end sections are missing in README

tic 0.5.0.9004

  • faq.Rmd: Add info how to avoid git race conditions during pkgdown deployment (#238)
  • step_install_ssh_keys(): Do not use git2r::config() when deploying on Windows to prevent build freezes
  • update blogdown templates
  • GitHub Actions: Always use option ‘–no-manual’ on Windows because LaTeX is not available

tic 0.5.0.9003

  • Files specified for deployment via step_push_deploy(commit_paths = ) are now force added to the index by git. This enables to add directories like docs/ (e.g. created by a local pkgdown build) to .gitignore and still deploy it during CI (#237).
  • step_rcmdcheck(): Test in dir “check” to simplify upload of artifacts

Github Actions

  • Set cron job to 4am to avoid potential download issues with R-devel on macOS
  • Github Actions: Use actions/checkout v2
  • Github Actions: Only deploy on R-release on macOS by default. This avoids git race conditions between runners.

tic 0.5.0.9002

  • Github Actions: {covr} now supports automatic upload of codecov results via their own CODECOV_TOKEN
  • use_tic_r(): Add support for conditional tic.R templates via argument deploy_on.
  • export use_tic_r() so that a manual workflow is possible (besides use_tic())
  • GitHub Actions: use actions “pat-s/always-upload-cache” instead of “actions/cache”

tic 0.5.0.9001

tic 0.5.0.9000

  • Same as previous version.

tic 0.5.0

Enhancements

Maintenance

  • Change for the default of the private SSH deploy key name from TRAVIS_DEPLOY_KEY to TIC_DEPLOY_KEY to have a generic name.
  • Change argument travis_private_key_name to private_key_name
  • Renamed yaml-templates.R to yaml_templates.R because the former caused troubles when previewing the dev version of the docs.
  • Beautified the CLI output of use_tic()
  • Replaced all instances of _tic_ in the docs by tic

tic 0.4.0.9000

tic 0.4.0

  • add macro do_drat()
  • start vignette “troubleshooting”
  • add {desc} to suggests
  • ci_can_push() never fails.
  • templates: always upgrade dep packages during {tic} installation

tic 0.3.0.9005

  • Make it possible to pass the endpoint arg from {travis} funs to use_tic()
  • mention the difference between .com and .org -> new vignette “org-vs-com”
  • move package to ropensci org

  • error_on = "note" also fails on warnings.

tic 0.3.0.9004

  • ci_can_Push(): Error with descriptive error message if deployment is not possible
  • ci_can_push(): Fix for Travis CI
  • optimize templates (especially matrix builds) by specifying which job is used for the pkgdown build

tic 0.3.0.9003

tic 0.3.0.9002

  • use_tic() supports running both Linux and macOS on Travis (#202).
  • Skip TicStep$prepare if prepare_call is given in add_code_step() (#211).
  • Fix preparation of step_add_to_drat().
  • use_tic() gains arguments that allow non-interactive use and re-running with the same settings if setup fails (#203).
  • Removed artificial sleeps with interactive setup.

tic 0.3.0.9001

  • Move use_travis_deploy() back to {travis}.

tic 0.3.0

tic 0.2.13.9020

  • Avoid building packages when installing dependencies.
  • Remove vignettes from package if checking with --no-build-vignettes to avoid warning from R CMD check.
  • Fix R CMD build and R CMD check switches on AppVeyor.

tic 0.2.13.9019

  • Building pkgdown site succeeds if docs/ directory is missing (#173, r-lib/pkgdown#1050).

tic 0.2.13.9018

tic 0.2.13.9017

  • Test utils and printing.
  • Exclude code that can only run interactively or in a CI from coverage.
  • Add comment regarding integration test.
  • Strip long source code lines.
  • Add review badge.
  • Add tic.R to .Rbuildignore for internal tests.
  • Update wordlist.
  • Fix typos.
  • Condition example on presence of Git repository.

tic 0.2.13.9016

  • Fix compatibility with git 2.21 and above for race conditions (#160).
  • step_build_pkgdown() clean site before building.
  • AppVeyor template makes sure packages are always installed from binary during bootstrapping.
  • CI templates install from GitHub if the version number indicates that the package is not on CRAN yet.
  • AppVeyor doesn’t cache R packages, because this leads to update problems. Binary installation is fast enough.
  • Don’t perform CRAN incoming checks, in particular the checks for large version components (#168).
  • The step_install_deps(), step_install_cran() and step_install_github() steps install binary packages by default, even if the CRAN version is ahead.
  • All files created by use_tic() are added to .Rbuildignore.
  • Package template for tic.R runs pkgdown only on Travis (#167).
  • Update vignettes (#156).

tic 0.2.13.9015

tic 0.2.13.9014

tic 0.2.13.9013

  • Using tidy evaluation for simpler code, more control and better printing of steps (#77).
  • Fix AppVeyor builds.
  • The README is now explicit about suggesting that each repo should contain only one project (#152).
  • Documentation uses the {rotemplate} package (#121).
  • Only install {remotes} and {curl} if not yet installed (#97).
  • New use_tic(), moved from {travis} (#138).
  • Updated templates (#81).
  • A failing step displays a traceback generated by rlang::trace_back() (#105).
  • do_pkgdown() and do_bookdown() now have a deploy argument and are documented on separate help pages. The new ?macro help page provides an overview.
  • Implement print() methods for DSL and stages (#77).
  • New do_bookdown() (#137).

tic 0.2.13.9012

tic 0.2.13.9011

tic 0.2.13.9011

step_rcmdcheck()

  • deprecate warnings_are_errors and notes_are_errors in favor of the new error_on argument
  • add args timeout and repos
  • call rcmdcheck() internally with error_on = "never" so that we can trigger the message on found warnings and notes
  • remote outdated doc about step_rcmdcheck() using a dedicated lib for the check

tic 0.2.13.9010

  • No longer using a separate library for package checks, because it causes a lot of problems with various steps which are not aware of this (#86, #88).
  • Packages coming with the R-installation are not updated anymore when preparing step_rcmdcheck(). See ?step_rcmdcheck() for detailed info. (#103)

tic 0.2.13.9009

  • The step_build_pkgdown() step now uses the same dedicated library as step_rcmdcheck().
  • Using the development version of rcmdcheck to work around problems finding the vignette builder (#84).
  • Draft for new “Get started” vignette (#63, @pat-s).

tic 0.2.13.9008

tic 0.2.13.9007

tic 0.2.13.9006

  • Support creating variables in tic.R by sourcing tic.R in a modifiable environment (#33).
  • Replaced private arguments with an environment that keeps track of internal state, now the code from add_package_checks() can be copied to a tic.R file (#74).

tic 0.2.13.9005

  • A failing step immediately fails the entire stage, subsequent steps are not run (#59).

tic 0.2.13.9004

tic 0.2.13.9003

  • Added integration tests for package checks and deployment, covering various common cases (#62).
  • Add integration test for deploying from a subdirectory.
  • Remove orphan argument from step_push_deploy(), because there’s no easy way to implement it reliably. If only a subdirectory is deployed to a separate branch (i.e., the path argument is set), orphan = TRUE is required.

tic 0.2.13.9002

  • Better strategy for handling race conditions during deployment, new changes are no longer silently overwritten with step_push_deploy() (#45).
  • Add integration test for package checks and race conditions (#62).
  • Clarify error message upon step failure.
  • add_package_checks() adds coverage checks only for non-interactive CIs.
  • Add reference to use_tic() (#55).
  • Document purpose of testing steps (#49).
  • Allow only predefined stage names (#48).

tic 0.2.13.9001

  • The pkgdown package is installed from CRAN.

tic 0.2.13.9000

tic 0.2-13 (2018-02-01)

tic 0.2-12 (2017-06-29)

tic 0.2-11 (2017-06-29)

tic 0.2-10 (2017-06-29)

  • Document all exported functions and many classes (#8).
  • step_add_to_drat() will also update the overview page if it exists.

tic 0.2-9 (2017-06-28)

tic 0.2-8 (2017-06-17)

  • An error occurring when running a step is printed in red (#5).

tic 0.2-7 (2017-06-13)

  • New step_write_text_file() for creating arbitrary text files, including ~/.R/Makevars (#14).
  • pkgdown documentation is now built for tags by default (#13).
  • The “openssl” package is now only suggested, not imported.
  • Removed step_run_covr() in favor of the new step_run_code() (#18).
  • load_from_file() reloads the file from disk if its mtime changes (#11).
  • All steps of a stage are run even in case of previous errors, but the stage still fails if at least one of its steps failed (#10).
  • Adding to known hosts or installing a SSH keys now requires a non-interactive CI.
  • New step_run_code() to run arbitrary code. If the code is a call with the pkg::fun(), notation, pkg is installed if missing (#1, #3). step_run_covr() remains for compatibility but is scheduled for removal.
  • Color the start of each step in the log (#5).
  • New step_add_to_known_hosts() to work around configuration problems on OS X (#16).
  • Export runner methods for all stages defined in Travis CI and AppVeyor (#17).

tic 0.2-6 (2017-06-04)

  • Technical release to sync default and production branches.

tic 0.2-5 (2016-11-27)

tic 0.2-4 (2016-11-27)

  • Use new DSL with the notion of stages with arbitrary names.
    • New load_from_file() replaces get_xxx_steps()
    • task_...() has been renamed to step_...()
    • A task is now something like an ad-hoc step
    • before_script() is now prepare_all_stages()
    • TravisTask is now TicStep
    • ci() is now exported
  • If environment variable CI is undefined, use LocalCI with sensible inference of repository and branch.
  • Stop if git exits with nonzero status.

tic 0.2-3 (2016-11-06)

  • Install package for task_build_pkgdown task.

tic 0.2-2 (2016-11-05)

  • DSL to define steps via step(), which are tasks with a branch and/or env var filter (#6).

tic 0.2-1 (2016-11-05)

  • Support environment variables from both Travis and AppVeyor (#6).
  • Add tests.
  • Rudimentary support for multiple CI systems.
  • Clean up dependencies.

tic 0.2 (2016-11-05)

Initial release.

  • Rudimentary configuration based on task objects. A task object is a list/environment which contains at least the members check(), prepare() and run() – functions without arguments, only check() needs to return a logical scalar. These can be subclasses of the new TravisTask R6 class, the package now contains six subclasses: HelloWorld, RunCovr, BuildPkgdown, InstallSSHKeys, TestSSH, and PushDeploy. The new methods of theses subclasses are exported as task_hello_world(), task_run_covr(), task_build_pkgdown() task_install_ssh_keys(), task_test_ssh(), and task_push_deploy(), respectively. The three functions before_script(), after_success() and deploy() accept a semicolon-separated list of task objects, which is by default taken from the TIC_AFTER_SUCCESS_TASKS and TIC_DEPLOY_TASKS environment variables. These functions call the prepare() and run() methods of the task objects if and only if the check() method returns TRUE (#42).